Water Sensor 水位感測器模組

台灣智能感測科技官網, 購買更多關於 水位感測, 水分, 的產品

產品編號： SNQ-002097

Water Sensor 水位感測器模組
Water Sensor 水位感測器模組 是一款簡單易用、性價比較高的水位 / 水滴識別檢測傳感器，其是通過具有一系列的暴露的平行導線線跡測量其水滴 / 水量大小從而判斷水位。輕鬆完成水量到模擬信號的轉換，輸出的模擬值可以直接被 Arduino 開發板讀取，達到水位報警的功效。

 

產品名稱：Water Sensor 水位感測器模組

工作電壓： DC3-5V

工作電流：小於 20mA

傳感器類型：模擬

檢測面積： 40mm x 16mm

製作工藝： FR4 雙面噴錫

工作溫度： 10 ℃ -30 ℃

工作濕度： 10%-90% 無凝結

產品重量： 3.5g

產品尺寸： 62mm x 20mm x 8mm

包裝方式：靜電袋密封


void setup()
{
Serial.begin(9600);
}
void loop()
{

int val = analogRead(A0); // read input value
Serial.print("Pin Value ");
Serial.println(val);
delay(2000);
}
 
Water Level Sensor / Depth Sensor
Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. output analog values can be directly read Arduino development board to achieve the level alarm effect.

Operating voltage: DC3-5V
Operating current: less than 20mA
Sensor Type: Analog
Detection Area: 40mmx16mm
Production process: FR4 double-sided HASL
Operating temperature: 10-30C
Humidity: 10% -90% non-condensing


Operating voltage: DC 3-5V, < 20mA
Production process: FR4 double-sided HASL
Sensor Type: Analog, Detection Area: 40mm x 16mm
Product Dimensions: 2.5 X 0.7 X 0.4 inches (7 X 2 X 1 cm)

更多關於 Water Sensor 水位感測器模組 的技術文件與範例